BXLKZ - 35N3383 SPRAYTEC GLASS & PLASTIC CLEANER 13-3/4 OZ

  • MSDS: BXLKZ
  • Manufacturer: SPC TECHNOLOGY
  • Product Name: 35N3383 SPRAYTEC GLASS & PLASTIC CLEANER 13-3/4 OZ
  • National Stock Number: 7930-00F040371
Product Identification

Product ID:35N3383 SPRAYTEC GLASS & PLASTIC CLEANER 13-3/4 OZ
MSDS Date:04/01/1990
FSC:7930
NIIN:00F040371
MSDS Number: BXLKZ

Responsible Party
SPC TECHNOLOGY
4801 N RAVENSWOOD AVE
CHICAGO, IL 60640-4496
US

Emergency Phone: 312-907-5181

Info Phone: 312-907-5181

Cage: 12341

Contractor
SPC TECHNOLOGY DIV OF PREMIER INDUSTRIAL CORP
BENSENVILLE, IL 60106-1713 US

Cage: 63590

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000


2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 5-10%

OSHA PEL 25 PPM (SKIN)

ACGIH TLV: 25 PPM (SKIN)


ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 1-5%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED/REPEATED INHALATION MAY BE
HARMFUL TO RESPIRATORY SYSTEM. SKIN/EYES: IRRITATION. CHRONIC
EFFECTS TO MUCOUS MEMBRANES. MISUSE/DELIBERATE INHALATION MAY BE
HARMFUL/FATAL. HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION

First Aid

First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
WASH THOROUGHLY W/PLENTY OF WATER & SOAP. INHALATION: REMOVE TO
FRESH AIR. GIVE OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:143F
Lower Limits:1.9
Upper Limits:8.5
Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:HEAT/PROLONGED SUNLIGHT MAY CAUSE
BURSTING. CONFINED SPACES-HAZARDOUS VAPOR MAY SPREAD, BURN/BUILDUP
IN LOW AREAS. AUTOIGNITION TEMP: 864F.

Accidental Release

Spill Release Procedures:EVACUATE AREA. REMOVE IGNITION SOURCES.
VENTILATE AREA. WEAR APPROVED RESPIRATORY PROTECTION, SUITABLE
PROTECTIVE CLOTHING. CLEAN UP W/ABSORBENT MATERIAL, CONTAIN & PICK
UP WASTE MATERIALS & PUT IN A SEALED APPROVED CONTAINER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM
HEAT/SPARKS/FLAMES/IGNITION SOURCES. USE IN WELL VENTILATED AREA.
Other Precautions:AVOID PROLONGED BREATHING OF VAPOR/SPRAY MIST &
CONTACT W/EYES & SKIN. DON'T TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:USE ONLY IN WELL VENTILATED AREA.
Ventilation:LOCAL/MECHANICAL: REQUIRED.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:IF VENTILATION IS INADEQUATE, WEAR APPROVED
RESPIRATORY EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:340F
Melt/Freeze Pt:M.P/F.P Text:-103F
Vapor Pres:0.6
Vapor Density:4.1
Spec Gravity:1
pH:10
Evaporation Rate & Reference:(WATER =1): >1
Solubility in Water:95%
Appearance and Odor:CLEAR LIQUID AEROSOL W/SHARP CHARACTERISTIC ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, HALOGENATED COMPOUNDS
Stability Condition to Avoid:HEAT, SPARKS, FLAMES/IGNITION SOURCES
Hazardous Decomposition Products:CO, NITROGEN OXIDES, AMMONIA, PORYLSIS
PRODUCTS

Disposal

Waste Disposal Methods:AEROSOL. DISPOSE OF WASTE IAW/FEDERAL, STATE &
LOCAL REGULATIONS. DON'T PUNCTURE, INCINERATE/BURN CONTAINERS.
DON'T EMPTY INTO DRAINS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.